top of page

Scalar Wave MWO harmonization machine v2.0

Multi-Wave Oscillator technology coupled with bifilar Tesla Coil wireless power transmitter, tesseract aetheric pump, and Scalar Wave antennae. This device acts as a MWO harmonization unit, that can also accept outside signals via the included audio cable. The Lakhovsky Harmonizer can be connected to a computer, cell phone, or any other device capable of outputting audio signals via a 3.5mm audio port. These signals are automatically imprinted into the energy field generated by the machine.

This is an advanced version of our original MWO harmonizer unit. The newer version features several programs that have been pre-installed into the unit. You can toggle between these settings simply by pressing a button on the front side of the device. These programs will make the device emit Scalar Waves and light patterns in different frequencies. More specifically, 9 of the Solfeggio frequencies are pre-installed into the machine.

Another improvement compared to the first iteration of the MWO harmonizer is that these devices are more powerful. Therefore we had to omit the option of battery power and only use USB for providing power. This will enable the device to work at higher powers for much longer.

Pre-installed frequencies;

  • 174 Hz - program #1

  • 285 Hz - program #2

  • 396 Hz - program #3

  • 417 Hz - program #4

  • 528 Hz - program #5

  • 639 Hz - program #6

  • 741 Hz - program #7

  • 853 Hz - program #8

  • 963 Hz - program #9

The effects of using these frequencies can be read from the table below. Light patterns were designed to improve the overall experience of using these machines.

When an external frequency is provided to the MWO harmonizer via the audio cable, the internal and external frequencies will be combined into one.

If you wish to only use an external frequency source, use the button to toggle between programs until you reach the one where no LEDs are on. This is the only program that has the internal frequency source disabled. In this mode, the MWO harmonizer will only use signals coming from the audio input.

External audio input can either be a 'clean' frequency generated by a frequency generator app or an audio file. For example, music with healing frequencies will work just as well. You can even use healing music from online platforms such as YouTube.

963 Hz
Energization, awakeness
852 Hz
Boost to intuition and intellect
741 Hz
Anxiety relief
639 Hz
Improved meditation experience
528 Hz
Cleansing, healing, DNA repair
417 Hz
Negative energy neutralization
396 Hz
Body harmonization
285 Hz
Sleep improvement, regeneration
176 Hz
Pain relief, relaxation
7.83 Hz
Charging water, healing stones, pellets

Charging orgone energy discs

You can use the MWO harmonizer to charge orgone energy discs in a similar way to how the SWCC v2.0 can be used. You can use the MWO harmonizer v2.0 to charge orgone discs either by utilizing pre-programmed frequencies or supplying external signals via a 3.5mm audio cable.

Depending on the type of orgone energy disc used, there are some variations in the procedure. We will describe 2 typical situations that we normally encounter when dealing with orgone discs.


  1. Charging of basic orgone disc with clear quartz crystals, orgone mixture, and no additional antenna inside the disc.

  2. Charging of advanced orgone disc with chakra-specific stones (carnelian, apatite, rose quartz, pyrite, etc.) and an integrated antenna (MWO, vortex, torus, etc.)

Charging of basis orgone discs


You can either use the pre-installed programs or an external frequency source. Basic orgone discs are less effective at being imprinted with different frequencies, however, the procedure is simpler and is therefore recommended for first-time users. The orgone discs that we provide will be fully charged within 15 to 20 minutes. There is no need to charge them longer since the full energy potential will be reached after that time and orgone discs will not be able to store any more energy.

Charging of advanced orgone discs


These discs are more sophisticated items that include various healing crystals and antennae. In order to properly charge them it is recommended that you either use an external frequency source provided by a frequency generator or select the program that corresponds to the properties of the healing crystals used in the orgone disc. This is essential because of the various stones used. Certain stones will respond better to certain frequencies. Using the wrong frequency will result in an improperly balanced orgone disc. This will in term lead to unsatisfactory results. However, if you accidentally charge the orgone disc with wring frequency, there is no permanent damage to the disc or crystals since such frequency can be overridden with a longer charging time at the correct frequency.

Each of these advanced orgonites corresponds to a specific chakra. In order to select the proper frequency please refer to the table below. Selected frequency should correspond to the chakra the stone in question has an effect on.

  • Root Chakra - 432 Hz (red jasper, garnet, obsidian, smoky quartz, rhodonite)

  • Sacral Chakra - 480 Hz (carnelian, citrine, sunstone, orange calcite)

  • Solar Plexus Chakra - 528 Hz (sunstone, yellow jasper, citrine, tigers eye, amber, pyrite)

  • Heart Chakra - 594 Hz (rose quartz, green jade, green aventurine, peridot, moldavite, amazonite)

  • Throat Chakra - 672 Hz (lapis lazuli, blue apatite, aquamarine, celestite, azurite)

  • Third Eye Chakra - 720 Hz (amethyst, lapis lazuli, labradorite, sodalite, lepidolite, black tourmaline)

  • Crown Chakra - 768 Hz (amethyst, lapis lazuli, lepidolite, labradorite, moonstone, selenite, howlite)

As you have probably noticed, some stones can be used for several chakras. This means that such stones can be successfully charged with different frequencies. But it is essential that you charge it with only 1 frequency at a time.


Example: citrine can be charged with 432Hz or 480Hz but never with both frequencies at the same time!


The duration of charging should be 15 to 20 minutes. If you wish to erase a certain frequency from the stone you can overwrite it with another by running the charging session for twice as long (30 to 40 minutes). 


Let's take the citrine disc for example again; You have a citrine disc that has been infused with the 432Hz to be used with the root chakra and now you wish to use it with the sacral chakra. For the 432Hz to be overwritten. You will have to charge the same disc for 30-40 minutes with the 480Hz.

Solfeggio frequencies that can be used for balancing chakras

  • Root Chakra - 396 Hz (red jasper, garnet, obsidian, smoky quartz, rhodonite)

  • Sacral Chakra - 417 Hz (carnelian, citrine, sunstone, orange calcite)

  • Solar Plexus Chakra - 528 Hz (sunstone, yellow jasper, citrine, tigers eye, amber, pyrite)

  • Heart Chakra - 639 Hz (rose quartz, green jade, green aventurine, peridot, moldavite, amazonite)

  • Throat Chakra - 741 Hz (lapis lazuli, blue apatite, aquamarine, celestite, azurite)

  • Third Eye Chakra - 852 Hz (amethyst, lapis lazuli, labradorite, sodalite, lepidolite, black tourmaline)

  • Crown Chakra - 963 Hz (amethyst, lapis lazuli, lepidolite, labradorite, moonstone, selenite, howlite)

These frequencies should also be used with compatible healing crystals or with the basic orgone discs. 

Video instructions

In order to make the use of MWO harmonizer as smooth as possible, we made a short video instruction on how to select different programs on the MWO harmonize v2.0.

When a program with no internally generated frequency is reached, the MWO harmonizer will only emit frequency it is provided from an external source using a 3.5mm audio cord. If no frequency is provided it will amplify signals from the environment. But in such an operation, the output power is lower and the effect will therefore also be diminished.

Operating conditions

Environmental operating conditions

  • maximum air temperature: 35°C

  • minimum air temperature: 0°C
  • maximum air humidity: 85%

* Operating MWO harmonizer in conditions that do not meet these parameters can lead to damage to the device!

Technical specifications

  • USB connector: USB type B
  • USB adapter requirements: 5V, 1A constant output current

bottom of page