A coil with no inside and no outside.

The Möbius strip has only one side and one edge. Trace its surface and you return to the start on the "other" face without crossing anything. Our Advanced Torsion Field Coil turns this shape into a working coil: a 44 x 16 mm band with a half twist carries one continuous groove, wound by hand with enamelled copper wire. After the first lap the winding comes back upside down; only after the second lap - 34 wraps in total - does it close.

What happens in the winding

Because of the half twist, the current passes each point of the band twice in opposed directions. Part of the magnetic field of one lap is opposed by the other, the same principle that makes Möbius and bifilar windings special: much of the classic inductive field folds back on itself, and what remains is a field with a shape ordinary solenoids and toroids cannot make. This is why Möbius and caduceus windings have such a long history in scalar-wave and radionics research.

What it stands for

The Möbius strip is infinity made visible - inner and outer, giving and receiving, joined into one path. In esoteric thought it is the union of opposites and the endless return of energy to its source, transformed. A signal that travels the whole surface twice before the loop closes is that principle in copper.

Connecting it

The module connects directly to our SWCC devices - the SWCC already has an amplifier built in, so nothing else is needed. It also works with other signal generators: the coil is a passive winding and needs an amplified signal, so with any other generator you connect it through an amplifier module (ours or another amplifier) and plug the amplifier output into the coil's two 4 mm banana sockets. The banana cable is not included with the set. Low-voltage signal sources only - never connect to mains power.

Specifications

- Core: twisted band 44 x 16 mm, half twist, approx. 142 mm across; about 70 mm high on its holder

- Winding: one continuous groove, 3.8 m enamelled copper wire, 34 wraps

- Holder: three prongs, wires hidden inside the front prong

- Input: 2 x 4 mm gold-plated banana sockets

- Connects directly to Aplicum SWCC devices (amplifier built in); with other signal generators an amplifier module is required

- Included: the coil module.

Designed, 3D printed and hand wound in the Aplicum workshop.