Lakhovsky MWO harmonizer v1.3.

3. How to use​

​

The Aplicum Lakhovsky MWO harmonizer v1.3. can operate in two modes:

 

1. Wireless control via the Eunoia App or SWCC Next Gen

2. External signal input through the 3.5 mm AUX ports

​

Both methods are simple and intuitive, giving users complete flexibility depending on their preference.

​

3.1 Connecting the Device with the Eunoia App

​​

Pairing the device with Eunoia allows full access to all internal programs, including Chakra programs, Alchemy elements, and the frequency generator that can generate frequencies up to 48kHz.

 

Follow these steps for the first-time setup:

 

1. Open the Eunoia App

   Make sure your phone’s Bluetooth and WiFi are enabled.

2. Go to the “Discover Devices” section

   The app will automatically scan for nearby Aplicum Connect devices.

3. Select the MWO Harmonizer v1.3.

   The device will appear in the list with its unique identifier. Tap on it to connect.

4. Wait for the initial pairing to complete

   This process may take a few seconds while Bluetooth and WiFi are configured.

5. Connection complete

   After the first successful pairing:

    

   • The Eunoia App will automatically remember the device

   • Future connections happen automatically, without scanning

   • All internal programs of the Aplicum Lakhovsky MWO harmonizer v1.3. become available in the app

   ​

Once connected, the device is fully controlled through Eunoia, including program selection, frequency adjustment, amplitude settings, and OTA firmware updates. You can also still use 3.5mm aux input at the same time but the signals generated by the internal oscillator and frequency input on the aux port will be mixed together.​

​

Please refer to the following screenshots for how to connect your Aplicum Connect compatible device to Eunoia app.

 

3.2 Using the Device Without the Eunoia App

​

If the user prefers not to use a phone or app, the device can operate entirely using external frequency input through the 3.5 mm audio jacks.

 

This option is suitable for:

 

• Audio generators

• Smartphones

• MP3 players

• Tablets

• Computers

• Radios

• Music players

 

How to use external input:

​

1. Connect a 3.5 mm AUX cable to either of the two audio ports.

2. Connect the other end to your signal source.

3. Play any audio or frequency signal (20 Hz – 48 kHz ideally).

4. The machine will immediately begin to emit the energy field with the carrier frequency of the external source.

 

Both ports are auto-detecting:

 

• Whichever port receives input becomes the input port

• The second port automatically becomes the output port, forwarding the same signal

• This allows instant daisy-chaining of multiple devices with shared signal

​

What kind of signals can be used?

 

• Pure tones

• Frequency sweeps

• Binaural beats

• Solfeggio tones

• Rife frequencies

• Voice recordings

• Music

• Nature sounds

• White noise

• Any audio signal​​

​

4 Visual Indicators of Operation

​​

10-LED Bar Indicator (Right Side)

 

On the right side of the device is a 10-segment LED bar. This indicator shows:

 

• Emission strength

• Program that is currently running (only with Eunoia connection)

​

As the MWO harmonizer emits energy field, the LEDs illuminate in dynamic patterns that mirror the strength and rhythm of the generated field. A rising and falling LED animation means the device is actively emitting magnetic and scalar waves.

5. Ways to Aplicum Lakhovsky MWO harmonizer v1.3.

​

The MWO Harmonizer v1.3 generates a stable, harmonizing field based on Multiple Wave Oscillator principles. Through overlapping resonant patterns, the device creates a coherent energetic environment that supports balance and consistency within the surrounding space.

This makes it suitable for continuous background use, personal environments, shared spaces, and multi-device configurations.

​

Placing Healing Crystals

 

Healing crystals can be placed on top of, near, or around the MWO Harmonizer v1.3 within its effective field area.

 

Recommended uses include:

 

• supporting the harmonizing field through crystal resonance

• allowing the crystal’s vibrational signature to interact with the surrounding environment

• complementing meditation or relaxation routines

• increasing coherence of the energetic atmosphere

 

The harmonizing field interacts with the crystalline structure, creating a combined energetic effect where the resonant patterns of the device and the crystal influence the space together.

 

Commonly used stones include:

 

• Quartz (Clear, Rose, Smoky)

• Amethyst

• Citrine

• Carnelian

• Black Tourmaline

• Lapis Lazuli

• Selenite

 

Users are encouraged to experiment with different crystals depending on personal preference or intended use.

​

Recharging Orgone Energy Items

 

The MWO Harmonizer v1.3 can be used to support the re-energizing and stabilization of orgone-based items through its continuous harmonizing field.

 

Items that can be placed near the device include:

 

• orgone energy discs

• orgone pyramids

• orgone tools

• scalar wave pendants

 

Place the item close to the device and allow one of the onboard programs to run. Over time, the harmonizing field supports the energetic consistency of the orgone material.

​

Targeted & Group Applications

 

Because the harmonizing field extends outward from the device in a stable and evenly distributed manner, the MWO Harmonizer v1.3 can be used in different configurations.

 

The device can be positioned toward:

 

• a specific area of a room

• a meditation or rest area

• a crystal arrangement

• energetic tools such as wands, towers, or plates

 

The field can pass through clothing and non-metallic materials, making it suitable for localized energetic focus within a space.

​

Group & Space Use

 

Multiple MWO Harmonizer v1.3 units can be used together to create a combined harmonizing environment.

 

This setup is useful for:

 

• harmonizing larger rooms

• shared living or working spaces

• group meditation sessions

• wellness or relaxation areas

• increasing overall field stability

 

When used together with other Aplicum Connect–compatible devices, coordination can be achieved through the Eunoia App or by using an SWCC Next Gen as a central coordinating device, ensuring consistent operation across the setup.