Setting Up the Devices

​

Begin by connecting everything in sequence. Power the 3-dial radionics machine using a USB Type-B cable. Once powered, connect its output (located on the back) via a 3.5 mm AUX cable to the input of the MWO Harmonizer v3.0. Next, power the MWO Harmonizer using its own USB Type-B cable. From there, connect its output to the Focused Beam Emitter using another 3.5 mm AUX cable.

​

Take a moment to ensure all connections are secure. The system works best when the signal flows cleanly through each stage.

​

Preparing the MWO Harmonizer

​

Before starting your session, the MWO Harmonizer must be set to NLS mode. Please refer to instructions for MWO harmonizer v3.0 for how to put the MWO harmonizer to NLS mode. This mode allows the harmonizer to properly interpret and expand the signal coming from the radionics machine.

 

In this configuration, the MWO Harmonizer acts as both a modulator and broadcaster, converting your intention into a wide, dynamic field.

 

​Defining Your Intention

​

This is the most important part of the process.

 

Before touching the dials or stick pag, take a moment to clearly define what you want. The more precise and emotionally clear your intention is, the better the system can lock onto it. It is essential that you actively concentrate on your wish, especially during the beginning of the session. You don’t need to strain or overthink—just hold the idea steadily in your mind.

 

Think of it as tuning your awareness to a specific outcome.

​

Using the Witness Plate

​

The witness plate on the radionics machine allows you to physically anchor your intention. You can place something on the plate that represents your goal. This could be:

 

• A personal object connected to the intention

• A written statement describing your wish

• A printed image or symbol

• Even a simple note with a name or goal

​

This element acts as a bridge between the abstract (your intention) and the physical system. It helps give the signal more structure and direction.

​

Take your time here since this step deepens the connection to your intention.

​

Tuning the Dials

​

Now you can begin adjusting the three dials.

 

There is no fixed method or numeric value to follow. Instead, turn each dial slowly and intuitively while keeping your focus on your intention.

 

The stick pad should also be used during this process, just as with all 3-dial radionics machines. Lightly move your fingers across the surface while tuning the dials. As you adjust, you may feel a slight increase in friction or a stickiness, this is used as feedback to help determine the correct setting. Practive is essential here, you may not get it right the first time so just keep trying.

 

This is a personal tuning process and over time is becomes easier and more intuitive.

 

Running the Session

​

Once everything is set, allow the system to run.

 

A typical session lasts between 15 and 60 minutes, but you can adjust this based on your preference.

 

At the beginning of the session, maintain your focus on the intention. After that, you can relax and let the system continue working in the background.

 

During operation, the signal is:

 

• Generated by the radionics machine

• Expanded and modulated by the MWO Harmonizer

• Emitted into the environment

 

Using the Focused Beam Emitter

​

The Focused Beam Emitter allows you to guide where the energy is directed. It is not essential for this process but it will improve the effectiveness of the manifestation.

 

For general manifestation, simply point the emitter upwards or into open space. This allows the field to spread more broadly.

 

If you are working with a specific target such as a person in a health related intention you can point the emitter directly toward them.

 

If the person is not physically present, pointing the emitter upwards is still effective.

​

You may also place a healing crystal on top of the emitter if you wish. This is optional and serves as an additional energetic element. We recommend using clear quartz.

​

Closing the Session

 

When you feel the session is complete, simply turn off the devices.

 

There is no strict ending ritual required, just power down the radionics machine and the MWO Harmonizer. Sessions usually last between 15 and 60 minutes.

​

 

Final Thoughts

 

 

This system is most effective when used with:

 

• Clear intention

• Calm focus

• Consistency over time

 

 

It is not about forcing results, but about setting direction and allowing the system to carry that signal forward.

 

With regular use, the process becomes more intuitive, and the interaction between you and the system becomes smoother and more natural.

• Output: 3.5mm stereo jack

• Dimensions: 135x195x36mm (5.30" x 6.66" x 1.41")

• Materials: plastic housing, anodised aluminium dials, gold plated pads and antennae