NLS Scanning with Eunoia App
The NLS Box v2.0 is designed to seamlessly integrate with the Eunoia app, enabling advanced NLS scanning technology for remote energetic healing. This technology is based on Non-Linear System (NLS) principles, allowing the device to detect subtle energy imbalances and harmonize them effectively, even at a distance.
The NLS Box v2.0 works by analyzing frequency patterns and interacting with your energetic field to support optimal balance and well-being. Using the Eunoia app, you can initiate a guided scanning session that lasts approximately 15 minutes, during which the device and app work together to deliver remote healing frequencies tailored to your needs.
This manual provides a step-by-step guide to connecting, powering on, and pairing the device, followed by instructions on starting a scan with the Eunoia app. Please follow each step carefully to ensure proper setup and effective operation of the NLS Box v2.0. Aplicum NLS system is optimised to work with the Eunoia app running on Apple iOS devices (iPhone or iPad).
Step 1
On the front side of your NLS Box v2.0. Insert the USB cable into the USB power connector.
Step 2
Flip the toggle switch to the upright position for wired connection (green LED) or down position for wireless connection (blue LED).
Wired connection
Skip this step if you have selected a wireless connection, and go to the next step.
Insert 3.5mm audio cable into the 3.5mm aux connector port on the NLS box v2.0.
Use 3.5mm aux to USB-C / lightning adapter (depending of the device that you are using) and then connect the adapter to your iPhone / iPad. Using an adapter cable with modern iOS devices is necessary because iPhones / iPads no longer have 3.5mm aux connector integrated.
Wireless connection
If you are using wired connection, you can skip this step.
Open the Bluetooth settings on your smartphone and locate the device name (MH-M28). Tap to connect. Once the connection is established there will be a 'connected' status displayed on the bluetooth devices list.
Set the speaker volume on your device to 100%. This step is essential for the NLS scanning to work properly!
Step 4
Open the Eunoia app, locate the NLS scanning program, and get ready to start the NLS Scanning program. At this point the vial holder with samples should be inserted into the NLS box. After the samples are inserted, the lid must be placed on top of the box. When the lid is securely placed on the box, the NLS scanning procedure can be started by pressing the 'start scan' button.
Step 5
The NLS Box v2.0 includes a dedicated internal vial holder that can accommodate up to 9 glass vials. To perform a remote scanning session based on a DNA reference, place a suitable biological sample—such as hair, nail clipping, or saliva—into one of the provided glass vials. Insert the vial(s) into the holder and then place the holder securely inside the NLS Box. It is not necessary to fill all nine vials; using a single vial is sufficient for effective operation.
Important: Do not mix samples from different individuals in the same session. Only one person's DNA should be present in the device at a time to ensure accurate energetic targeting and prevent cross-interference.
After the session is complete, the glass vials should be cleaned and disinfected by placing them in boiling water for a minimum of 3 minutes. This ensures proper hygiene and prevents contamination between uses.
Before starting the scanning procedure, make sure to close the lid of the NLS Box. This ensures that the contents inside are energetically sealed and protected from external influences such as electromagnetic fields (EMF) and environmental interference.
Once the NLS Box is closed and the DNA sample is properly placed inside, you can begin the scanning procedure using the Eunoia app. Simply open the app, ensure the device is connected, and tap the option to start scanning. The entire process is automated—once initiated, the app and the NLS Box work together to perform the full energetic analysis and harmonization cycle without the need for further user input. During the session, the green LEDs located at the bottom of the NLS Box will glow, indicating that the scanning process is active. The session typically lasts around 15 minutes, during which the device operates in a closed and energetically shielded environment for optimal effectiveness.