Scalar Wave Phase Array module

1. Overview

The Scalar Wave Phase Array Module produces harmonized scalar wave patterns through a phased array configuration. This enables effective field distribution across a wider area compared to single-point emitters.

The device can be used:

as a standalone unit
as part of a multi-device energetic setup
in synchronized group or space-based applications

Its compact size allows for flexible placement in various environments.

2. Setup

To begin using the Aplicum Scalar Wave Phase Array module the first step is to provide stable and correct power.

Connect the USB-C cable

Insert the USB Type-C connector into the power port located on the rear side of the device. Ensure it is firmly seated.
Use a proper 5V power source

Plug the other end of the cable into a standard 5V USB power supply, such as a phone charger.
- Recommended output: 5V, 1.5A
- Lower-current adapters will still work, but the device may not reach full amplification power. Minimum current required is 1A.
Avoid laptop chargers and USB-C PD adapters

Modern laptop chargers use USB-C Power Delivery (PD) technology and can automatically switch between multiple voltages (5V, 9V, 12V, 15V, 20V, and even 24V).

The Aplicum Scalar Wave Phase Array module is designed exclusively for 5V operation, and connecting a PD charger can expose the electronics to dangerous voltages that may cause permanent damage.

Only use traditional 5V USB power adapters.
Verify startup

When powered correctly:
- The LEDs on the device will illuminate
  - white light: device powered on and ready to be used
  - green light: Wifi connected
  - Blue light: Bluetooth connected
  - purple light: Bluetooth and WiFi connected
- The internal amplifier will initialize
The device is now ready for use with:
- The Eunoia App
- SWCC Next Gen
- Or external 3.5 mm frequency sources
Safe placement

Place the device on a flat, stable surface during operation.

The Phase Array antenna does not heat significantly, but adequate airflow ensures optimal long-term performance.

Powered on

3. How to use

The Aplicum Phase Array module can operate in two modes:

Wireless control via the Eunoia App or SWCC Next Gen
External signal input through the 3.5 mm AUX ports

Both methods are simple and intuitive, giving users complete flexibility depending on their preference.

3.1 Connecting the Device with the Eunoia App

Pairing the device with Eunoia allows full access to all internal programs, including Chakra programs, Alchemy elements, and the frequency generator that can generate frequencies up to 48kHz.

Follow these steps for the first-time setup:

Open the Eunoia App

Make sure your phone’s Bluetooth and WiFi are enabled.
Go to the “Discover Devices” section

The app will automatically scan for nearby Aplicum Connect devices.

(Screenshot placeholder)
Select the Aplicum Phase Array

The device will appear in the list with its unique identifier.

Tap on it to connect.

(Screenshot placeholder)
Wait for the initial pairing to complete

This process may take a few seconds while Bluetooth and WiFi are configured.
Connection complete

After the first successful pairing:
- The Eunoia App will automatically remember the device
- Future connections happen automatically, without scanning
- All internal programs of the Aplicum Scalar Wave Phase Array module become available in the app

Once connected, the device is fully controlled through Eunoia, including program selection, frequency adjustment, amplitude settings, and OTA firmware updates. You can also still use 3.5mm aux input at the same time but the signals generated by the internal oscillator and frequency input on the aux port will be mixed together.

Please refer to the following screenshots for how to connect your Aplicum Connect compatible device to Eunoia app.

3.2 Using the Device Without the Eunoia App

If the user prefers not to use a phone or app, the device can operate entirely using external frequency input through the 3.5 mm audio jacks.

This option is suitable for:

Audio generators
Smartphones
MP3 players
Tablets
Computers
Radios
Music players

How to use external input:

Connect a 3.5 mm AUX cable to either of the two audio ports.
Connect the other end to your signal source.
Play any audio or frequency signal (20 Hz – 48 kHz ideally).
The Phase Array antenna will immediately begin to emit the signal as a magnetic and scalar wave field.

Both ports are auto-detecting:

Whichever port receives input becomes the input port
The second port automatically becomes the output port, forwarding the same signal
This allows instant daisy-chaining of multiple devices with shared signal

What kind of signals can be used?

Pure tones
Frequency sweeps
Binaural beats
Solfeggio tones
Rife frequencies
Voice recordings
Music
Nature sounds
White noise
Any audio signal

4 Visual Indicators of Operation

10-LED Bar Indicator (Right Side)

On the right side of the device is a 10-segment LED bar. This indicator shows:

Emission strength
Program that is currently running (only with Eunoia connection)

As the phase array antenna emits energy pulse rays, the LEDs illuminate in dynamic patterns that mirror the strength and rhythm of the generated field. A rising and falling LED animation means the device is actively emitting magnetic and scalar waves.

5. Ways to Use the Scalar Wave Phase Array Module

The Scalar Wave Phase Array Module generates a coherent scalar field through its phase-aligned emission structure. Instead of a single focal point, the Phase Array produces a distributed and harmonized field that fills the surrounding space evenly. This makes it particularly suitable for area-based work, group environments, and multi-device configurations.

Placing Healing Crystals

Healing crystals can be placed in front of, above, or around the Phase Array Module within its effective field zone.

Recommended uses include:

amplifying the scalar field through crystal resonance
projecting the vibrational signature of the crystal into the surrounding space
supporting chakra or alchemy-based programs
improving field coherence during meditation or group sessions

The scalar field interacts with the crystalline structure, creating a combined energetic effect that merges the emitted phase pattern with the crystal’s natural resonance.

Commonly used stones include:

Quartz (Clear, Rose, Smoky)
Amethyst
Citrine
Carnelian
Black Tourmaline
Lapis Lazuli
Selenite

Users are encouraged to experiment with different crystals depending on their intention or desired energetic outcome.

Recharging Orgone Energy Items

The Phase Array Module is well suited for recharging and stabilizing orgone-based items due to its continuous, evenly distributed scalar field.

Items that can be re-energized include:

orgone energy discs
orgone pyramids
orgone tools
scalar wave pendants

Place the item within the effective field area of the device and run one of the onboard programs or a selected frequency. Over time, the scalar field helps restructure and refresh the energetic composition of the orgone material.

Targeted & Group Applications

Because the Phase Array emits a directional and spatially coherent field, it can be used in several configurations.

Targeted Use

The device can be oriented toward:

a specific area of the body
a crystal arrangement
an orgone grid
energetic tools such as wands, towers, or plates

The scalar field can penetrate clothing and non-metallic materials, making it suitable for focused energetic work and localized balancing.

Group & Space Use

Multiple Phase Array Modules can be used together to form a combined scalar field environment.

This setup is useful for:

harmonizing larger rooms
group meditation sessions
shared wellness spaces
coordinated energetic clearing
increasing overall field stability and coherence

When used together with other Aplicum Connect–compatible devices, synchronization can be achieved via the Eunoia App or through an SWCC Next Gen acting as a coordinating device, ensuring that all units operate with matching programs or frequencies.