How to use Scalar Wave Cosmic Communicator v2.2
Welcome to Scalar Wave Cosmic Communicator v2.2 (SWCC v.2.2) — the most advanced version of our general-purpose radionics machine, designed for manifestation work, energetic balancing, remote support, and multi-purpose scalar-wave applications.
The SWCC family also includes specialized editions, such as:
-
SWCC Alchemy Edition – optimized for alchemical imprinting, elixir preparation, and subtle-energy alchemy
-
SWCC Healing Crystal Edition – designed specifically for imprinting, harmonizing, and amplifying the energetic signatures of minerals and crystals
However, SWCC v2.2 remains the flagship all-rounder:
the most powerful, versatile, and universally applicable model for everyday radionics and scalar-wave energetic work.
Built on the proven foundation of SWCC v2.0, this upgraded model introduces stronger output, expanded internal programs, Bluetooth connectivity, WiFi software updates, and an entirely new technology generation for increased energetic coherence.
This guide will help you get the most out of your device.
1. What’s New in SWCC v2.2
Compared to SWCC v2.0, the v2.2 includes major enhancements:
-
More Internal Chakra Programs
New blended harmonics for deeper energetic balancing.
-
Bluetooth Connection (Eunoia App)
Control the device from your phone with expanded program options and remote-healing tools.
-
WiFi Software Updates
Install new features, enhanced programs, and future improvements effortlessly.
-
25% Stronger Output Power
The energetic field is more coherent, stable, and far-reaching.
-
New Technology Generation
Improved signal purity, faster processing, and lower noise levels.
2. Copying information
Copying information is performed by a combination of power settings on two coils and pressing the ‘imprint’ button. Most of the procedure is done automatically by the SWCC.
To copy information, you will require 2 objects. The first object is the object that has the information you would like to copy. We will refer to that object as ‘original’ from now on. The second object is the object that will receive the information from the original. We will refer to that object as the ‘receiver’. Information transfer is based upon the energy flow. Energy flows from the area of higher potential to an area of lower potential. With SWCC we can easily establish different energy potentials on the left and right slots by changing power settings using the power knobs.
Copy procedure:
-
Place the original on the left slot of SWCC and the receiver on the right side.
-
Provide power to the SWCC either using batteries or a USB type B cable.
-
Set power on the left side to maximum and power on the right side to a minimum.
-
Press the ‘imprint’ button.
-
LEDs under the slots will start to cycle. The copy procedure is not in progress.
-
Wait for a certain amount of time. Usually, 15 - 45 minutes will be enough.
Note: Power is set by turning the power knobs. When the knob is turned, the LED indicators will change in intensity. The more LEDs that light up, the greater the power. Changing power during the imprint procedure is not possible. Setting power on the left to max and min to the right will create the greatest energy potential difference. You can also experiment with lower potential differences.
If the power is set to the same level on both slots, the copying procedure will not work since the energy potential difference will be zero. If powering the SWCC using batteries, the copy procedure will take longer due to less power being available compared to the USB cable power supply. When USB power is used, the ‘power’ button will be overridden and will not work. The ‘power’ button only works when battery power is used. The SWCC v2.0 can also be upgraded with the MWO harmonization disc
upgrade kit. You can also switch the original and the received from the left to the right spot. What matters is that the original is placed on a slot with higher energy potential and the receiver to the slot with lower energy potential.
3. Imprinting information
Compared to copying, imprinting is different in the fact that the information imprinted into the receiving objects originates either from the SWCC or from a device connected to the SWCC using a 3.5mm audio cable.
SWCC is capable of automatically imprinting Schumann frequencies. This works well for imprinting water, healing crystals, and recharging orgone devices.
Imprinting procedure:
-
Place receiving items on either or both of the slots of the SWCC.
-
Provide power to the SWCC either using batteries or a USB type B cable.
-
Set power to the left and right side slots.
-
Press the ‘imprint’ button.
-
LEDs under the slots will start to cycle. The imprinting is now in progress.
-
Wait for a certain amount of time. This time depends on the objects.
Notes: The larger the item being imprinted, the more power is required. For example, a small glass of water can easily be charged on a low power setting but a larger jar will require maximum available power. Objects that can be imprinted are crystals, orgone energy devices, and water. That being said, anything that contains any of the above-mentioned substances can be imprinted. With SWCC v2.2. you can now imprint larger items compared to with older units of the SWCC v.2.0 and v2.1.
Some of the recommended frequencies for imprinting can be found in the table below. In order to generate these frequencies, we recommend using tone generator software that works on a PC or phone. In order for the SWCC to receive these frequency signals, it should be connected to the PC or phone using the included 3.5mm audio cable. This is the same cable as is used for connecting external speakers to a computer.
Title | ID |
|---|---|
963 Hz | Energization, awakeness |
852 Hz | Boost to intuition and intellect |
741 Hz | Anxiety relief |
639 Hz | Improved meditation experience |
528 Hz | Cleansing, healing, DNA repair |
417 Hz | Negative energy neutralization |
396 Hz | Body harmonization |
285 Hz | Sleep improvement, regeneration |
176 Hz | Pain relief, relaxation |
7.83 Hz | Charging water, healing stones, pellets |
4. Charging orgone energy discs
SWCC v2.2 is an ideal tool for charging orgone energy discs, infusing them with a certain frequency and cleansing them of negative energies.
Depending on the type of orgone energy disc used, there are some variations in the procedure. We will describe 3 typical situations that we normally encounter when dealing with orgone discs.
-
Charging of classic orgone disc with clear quartz crystals and no additional antenna inside the disc.
-
Charging of advanced orgone disc with chakra-specific stones (carnelian, apatite, rose quartz, pyrite, etc.) and an integrated antenna (MWO, vortex, torus, etc.)
-
Cleansing of orgone discs. This is usually done with Shungite / Elite Shungite discs that can either be without an antenna or with one. Shungite discs are specifically designed for protection and can absorb negative energies therefore it is essential that they are regularly cleansed.
Charging of classic orgone discs
This is the simplest of tasks and does not require any external frequency source. You can charge either 1 or 2 orgone discs using the SWCC directly. All that is needed in this procedure is to set the power of both slots to maximum using the knobs at the front of the SWCC. After that, the ‘imprint’ button should be pressed and the SWCC will do the rest automatically. The orgone discs that we provide will be fully charged within 15 to 20 minutes. There is no need to charge them longer since the full energy potential will be reached after that time and orgone discs will not be able to store any more energy.
Charging of advanced orgone discs
These discs are more sophisticated items that include various healing crystals and antennae. In order to properly charge them it is recommended that you use an external frequency source provided by a frequency generator. This is essential because of the various stones used. Certain stones will respond better to certain frequencies. Using the wrong frequency will result in an improperly balanced orgone disc. This will in term lead to unsatisfactory results. However, if you accidentally charge the orgone disc with wring frequency, there is no permanent damage to the disc or crystals since such frequency can be overridden with a longer charging time at the correct frequency.
Each of these advanced orgonites corresponds to a specific chakra. In order to select the proper frequency please refer to the table below. Selected frequency should correspond to the chakra the stone in question has an effect on.
-
Root Chakra - 432 Hz (red jasper, garnet, obsidian, smoky quartz, rhodonite)
-
Sacral Chakra - 480 Hz (carnelian, citrine, sunstone, orange calcite)
-
Solar Plexus Chakra - 528 Hz (sunstone, yellow jasper, citrine, tigers eye, amber, pyrite)
-
Heart Chakra - 594 Hz (rose quartz, green jade, green aventurine, peridot, moldavite, amazonite)
-
Throat Chakra - 672 Hz (lapis lazuli, blue apatite, aquamarine, celestite, azurite)
-
Third Eye Chakra - 720 Hz (amethyst, lapis lazuli, labradorite, sodalite, lepidolite, black tourmaline)
-
Crown Chakra - 768 Hz (amethyst, lapis lazuli, lepidolite, labradorite, moonstone, selenite, howlite)
As you have probably noticed, some stones can be used for several chakras. This means that such stones can be successfully charged with different frequencies. But it is essential that you charge it with only 1 frequency at a time.
Example: citrine can be charged with 432Hz or 480Hz but never with both frequencies at the same time!
The duration of charging should be 15 to 20 minutes. If you wish to erase a certain frequency from the stone you can overwrite it with another by running the charging session for twice as long (30 to 40 minutes).
Let's take the citrine disc for example again; You have a citrine disc that has been infused with the 432Hz to be used with the root chakra and now you wish to use it with the sacral chakra. For the 432Hz to be overwritten. You will have to charge the same disc for 30-40 minutes with the 480Hz.
Cleansing of orgone discs
For cleansing of the orgone discs, we recommend using Schumann frequencies. Luckily the SWCC already has an integrated Schumann frequency generator that will cycle through the Schumann frequency and the 2 harmonics. This function is enabled with the press of the ‘power boost’ button. Therefore there is no need for an external frequency source when cleansing the orgone discs. However, you can still opt to provide an external Schumann frequency source if you so desire. During cleansing power should also be set to maximum on both slots using the power knobs. You can cleanse 1 or 2 orgone discs at a time with the SWCC v2.2.
Eunoia app also has an extensive library of various frequencies available. You can use these frequencies with the SWCC v.2.2.
5. Onboard programs
1. COPY Program
Function:
Copies the informational pattern of an object placed on the SWCC imprinting plate and transfers it into a target object such as water, crystals, oils, talismans, or samples. Copy procedure is described in section 1. of this page.
Use cases:
-
Imprinting water or oils
-
Copying crystal harmonics
-
Creating energetic duplicates
-
Radionic imprint creation
COPY is the first program in the cycle.
2. The Seven Chakra Programs
Each chakra program emits scalar-wave patterns tuned to the corresponding energy center. These programs use proprietary harmonic combinations based on color frequency, brainwave coupling, and rotation-field resonance, generated through the SWCC’s internal scalar coil system.
2.1 Root Chakra (Muladhara)
Grounding, stability, survival energy, security, physical presence.
Useful for stabilizing after stressful events or for grounding imprinting processes.
2.2 Sacral Chakra (Svadhisthana)
Creativity, emotional flow, sensuality, adaptability.
Assists with emotional imprinting, creative sessions, and energizing water for emotional balancing.
2.3 Solar Plexus Chakra (Manipura)
Confidence, willpower, motivation, personal strength.
Supports manifestation sessions and intention-focused imprinting.
2.4 Heart Chakra (Anahata)
Love, compassion, forgiveness, emotional release.
Ideal for imprinting harmonics for emotional healing and interpersonal connection.
2.5 Throat Chakra (Vishuddha)
Communication, truth, expression, clarity.
Useful for energetic support in public speaking, singing, or expression.
2.6 Third Eye Chakra (Ajna)
Intuition, insight, awareness, inner vision.
Helps with remote sessions, psychic work, visualization, and higher-mind imprinting.
2.7 Crown Chakra (Sahasrara)
Spiritual connection, consciousness, enlightenment.
Useful for meditation enhancement and imprinting high-frequency harmonics.
The chakra programs always appear in this order, after COPY.
3. ENERGIZE Program
Function:
Generates a strong scalar vortex output intended to energize objects, water, crystals, and the surrounding space.
This program uses a powerful combination of harmonics, producing:
-
Increased scalar amplitude
-
Wider transmission field
-
High-energy vortex pattern
-
Greater coherence for manifestation and charging
This is the strongest general-purpose energy-amplification mode.
Use cases:
-
Charging talismans
-
Energizing drinking water
-
Space clearing
-
Boosting intentions
-
Recharging crystals and orgone devices
ENERGIZE appears after the 7 chakra programs.
4. BLANK PROGRAM
Function:
Provides a neutral, unmodulated scalar field.
This mode is specifically designed for external frequency input.
When BLANK is selected, the SWCC stops generating its internal harmonic modulations and instead acts as a scalar-wave amplifier for frequencies from an external source.
External Input Connection
You can connect any compatible frequency generator to the SWCC via:
→ 3.5mm AUX Input Port
The SWCC will convert the external frequency into:
-
Scalar-wave emission
-
Magnetic vortex modulation
Use cases:
-
Experimental frequency transmission
-
Rife / PEMF / tone generator input
-
Custom frequency imprinting
-
Scalar-wave broadcasting of third-party frequencies
-
Use with cymatics apps (like your Aethergenerator & Cymatic app)
-
Use with radionic machines and sweep generators
BLANK is always the final program in the onboard sequence, it can be identified by all LEDs under the 2 slots being off.
Program Order Summary
-
COPY (first program when device is powered on)
-
Root
-
Sacral
-
Solar Plexus
-
Heart
-
Throat
-
Third Eye
-
Crown
-
ENERGIZE
-
BLANK (External frequency mode)